Reference Guide

Detailed
Description
Cannot perform a 110V AC operation because the Extended Power Performance
(EPP) feature is enabled.
Recommended
Response
Action
Disable the Extended Power Performance (EPP) feature and retry the operation.
Category System Health
Subcategory PWR = Power Usage
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PWR2250
Message Unable to turn on the server because the chassis infrastructure not ready.
Detailed
Description
The server did not turn on bacause the chassis infrastructure is not ready. The
chassis infrstructure includes: PCIe subsystem, storage components, and the
chassis management controller.
Recommended
Response
Action
Check the status of the chassis infrastructure in the CMC Web or RACADM
interface. Wait until the chassis infrastructure components are fully turned on.
Category Audit
Subcategory PWR = Power Usage
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log;None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
1083