Reference Guide

PSU8520
Message Enhanced Dynamic Power Supply Engagement (DPSE) is fully supported.
Detailed
Description
The Dynamic Power Supply Engagement feature is supported and fully operational.
Recommended
Response
Action
No response action is required.
Category Audit
Subcategory PSU = Power Supply
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PSU8521
Message PSU arg1 exceeded upper temperature threshold and has been turned off.
Arguments
• arg1 = slotnum
Detailed
Description
The power supply unit (PSU) identified in the message was turned off because the
termperature exceeded the high temperature threshold in the unit.
Recommended
Response
Action
Remove and reinsert the PSU or remove AC power and reapply power to the PSU
to get it functional again.
Category Audit
Subcategory PSU = Power Supply
Severity Severity 1 (Critical)
Trap/EventID 8329
LCD Message No LCD message display defined.
Initial Default None
1048