Reference Guide

Severity Severity 2 (Warning)
Trap/EventID 8330
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PSU8515
Message Unable to set the Enable Dynamic Power Supply Engagement attribute.
Detailed
Description
Unable to set the Enable Dynamic Power Supply Engagement attribute.
Recommended
Response
Action
Do the following: 1) Retry the operation. 2) If the issue persists, review the tracelog
for more details. To retrieve the tracelog, in the CMC Web interface, go to
Troubleshooting > Diagnostics page and enter the "gettracelog" command, or use
RACADM "gettracelog" command. If the issue continues to persist, contact your
service provider and provide the tracelog.
Category Audit
Subcategory PSU = Power Supply
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PSU8516
Message Unable to set redundancy policy because PSU enumeration is in progress.
Detailed
Description
Unable to set redundancy policy because PSU enumeration is in progress. The
policy can be set after PSU enumeration is complete.
1045