Reference Guide

LCD Message No LCD message display defined.
Initial Default SNMP Alert;OS Log;None
Server
Administrator
Event ID
5353
Server
Administrator
Trap ID
5353
PSU1010
Message The DC power supply is switched off.
Detailed
Description
The power supply unit is switched off. Either you have switched off the power
supply unit or it is defective.
Recommended
Response
Action
Check to see whether the power switch is turned off or on. If it is turned off, turn it
on. If the problem is not corrected, verify that the power cord is attached and
functional. If the problem continues or if the power switch is already turned on,
then replace the power supply unit.
Category Storage
Subcategory PSU = Power Supply
Severity Severity 1 (Critical)
Trap/EventID 4233
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PSU102
Message Power suppy arg1 status is unknown.
Arguments
• arg1 = power supply unit
Detailed
Description
The status of the power supply unit identified in the message is unknown, because
of one of the following reasons: 1) The power supply unit is not correctly seated. 2)
The power cable may not be connected properly or diconnected. 3) The power
supply unit has failed. 4) There is an input power failure.
1040