Reference Guide

PSU1007
Message arg1 has failed.
Arguments
• arg1 = PSU Sensor Name
Detailed
Description
A device has been failed and the system is no longer functioning in optimal
condition.
Recommended
Response
Action
Replace the device.
Category Storage
Subcategory PSU = Power Supply
Severity Severity 1 (Critical)
Trap/EventID 4233
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PSU101
Message Power supply arg1 is not present.
Arguments
• arg1 = power supply unit
Detailed
Description
The power supply unit identified in the message is not present, because of the one
of the following reasons: 1) The power supply unit is not correctly seated. 2) The
power cable may not be connected properly or diconnected. 3) The power supply
unit has failed. 4) There is an input power failure.
Recommended
Response
Action
Do one of the following to resolve the issue: 1) reseat the power supply unit. 2)
Reconnect the power cable to the power supply unit. 3) Install a new power supply
unit 4) Restore the input power supply.
Category System Health
Subcategory PSU = Power Supply
Severity Severity 1 (Critical)
1039