Reference Guide

Server
Administrator
Trap ID
Not Applicable
PSU0042
Message An output over current fault detected on power supply arg1 .
Arguments
• arg1 = number
Detailed
Description
none
Recommended
Response
Action
1) Remove the power supply input cord and then remove power supply. 2) Re-
install the power supply and then re-install the power supply cord. 3) If the issue
persists, contact technical support. Refer to the product documentation to choose
a convenient contact method.
Category System Health
Subcategory PSU = Power Supply
Severity Severity 1 (Critical)
Trap/EventID 2185
LCD Message Output over current fault detected on PSU <number>. Check PSU.
Initial Default IPMI Alert;LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PSU0043
Message An output under current fault detected on power supply arg1 .
Arguments
• arg1 = number
Detailed
Description
None
Recommended
Response
Action
1) Remove the power supply input cord and then remove power supply. 2) Re-
install the power supply and then re-install the power supply cord. 3) If the issue
persists, contact technical support. Refer to the product documentation to choose
a convenient contact method.
Category System Health
1017