Reference Guide

PST0208
Message System BIOS has halted.
Detailed
Description
System BIOS has halted and is unable to continue.
Recommended
Response
Action
Do one of the following: 1) If new hardware has been added, remove the new
hardware and restart the server, 2) Turn server off and back on using the power
button, or 3) Remove and reapply server input power. If the problem persists,
contact your service provider. Refer to the product documentation to choose a
convenient contact method.
Category System Health
Subcategory PST = BIOS POST
Severity Severity 1 (Critical)
LCD Message System BIOS has halted. Check console for details.
Initial Default None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PST0209
Message System BIOS has halted due to Non-Maskable Interrupt (NMI).
Detailed
Description
System BIOS has halted and is unable to continue. System BIOS has detected a
Non-Maskable Interrupt (NMI) which may have been caused by a hardware change.
Recommended
Response
Action
Do one of the following: 1) If new hardware has been added, remove the new
hardware and restart the server, 2) Turn server off and back on using the power
button, or 3) Remove and reapply server input power. If the problem persists,
contact your service provider. Refer to the product documentation to choose a
convenient contact method.
Category System Health
Subcategory PST = BIOS POST
Severity Severity 1 (Critical)
LCD Message System halted due to NMI: Check Console for Details
Initial Default None
1000