Reference Guide

CTL41
Message Single-bit ECC error onarg1.
Arguments
• arg1 = Controller name
Detailed
Description
An error involving a single bit has been encountered during a read or write
operation. The error correction algorithm has corrected this error.
Recommended
Response
Action
No response action is required.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
2290
Server
Administrator
Trap ID
75300
CTL42
Message Enclosure Management Module (EMM) hot plug is not supported onarg1.
Arguments
• arg1 = Controller name
Detailed
Description
An attempt to hot plug an Enclosure Management Module (EMM) has been
detected.
Recommended
Response
Action
If the new enclosure and its device are not detected by the operating system, try
restarting your system to verify the newly attached enclosure and its sub-
components are detected. See the hardware documentation for more information.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
2304
81