Reference Guide

Detailed
Description
This alert is provided for informational purposes.
Recommended
Response
Action
No response action is required.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
2267
Server
Administrator
Trap ID
75100
CTL40
Message Multi-bit ECC error onarg1DIMM.
Arguments
• arg1 = Controller name
Detailed
Description
An error involving multiple bits has been encountered during a read or write
operation. The error correction algorithm recalculates parity data during read and
write operations. If an error involves only a single bit, it may be possible for the
error correction algorithm to correct the error and maintain parity data. An error
involving multiple bits, however, generally indicates data loss. In some cases, if the
multi-bit error occurs during a read operation, then the data on the disk may be ok.
If the multi-bit error occurs during a write operation, then data loss has occurred.
Recommended
Response
Action
Replace the Dual In-line Memory Module (DIMM). The DIMM is a part of the
controller battery pack. Refer to the storage hardware documentation for
information on replacing the DIMM. You may need to restore data from backup.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
2289
Server
Administrator
Trap ID
75400
80