Reference Guide

Recommended
Response
Action
Check for factors that may cause overheating. For example, verify that the
enclosure fan is working. You should also check the thermostat settings and
examine whether the enclosure is located near a heat source. Make sure the
enclosure has enough ventilation and that the room temperature is not too hot.
Refer to the enclosure documentation for more diagnostic information.
Category Storage
SubCategory TMP = Temperature
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
2102
Server
Administrator
Trap ID
105400
TMP1003
Message arg1has crossed the minimum failure threshold.
Arguments
• arg1 = tempsensor name
Detailed
Description
The enclosure is too cold.
Recommended
Response
Action
Check whether the thermostat setting is too low and whether the room
temperature is too cool.
Category Storage
SubCategory TMP = Temperature
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
2103
Server
Administrator
Trap ID
105400
287