Reference Guide

Recommended
Response
Action
Do of the following to resolve the issue: 1) Reconnect the power cord to the power
supply unit. 2) Replace the power supply unit that has the failed power cord sensor,
with a new power supply unit. 3) Make sure that the input power supply is restored.
Category System Health
SubCategory SYS = System Info
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
Server
Administrator
Trap ID
SYS117
Message The input power supply is restored.
Detailed
Description
The input power supply is restored to the system.
Recommended
Response
Action
No response action is required.
Category System Health
SubCategory SYS = System Info
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
Server
Administrator
Trap ID
SYS118
Message The input power supply is not available.
Detailed
Description
The input power supply is not avialable because of one of the following reasons: 1)
The power cable may not be connected properly or disconnected. 2) There is an
input power failure.
279