Reference Guide

23
STOR Event Messages
STOR1
Message A devicearg1is in an unknown state.
Arguments
• arg1 = device name
Detailed
Description
The controller cannot communicate with a device. The state of the device cannot
be determined. There may be a bad or loose cable, or a missing device, or a
problem with the driver or firmware.
Recommended
Response
Action
See the storage hardware documentation for information on checking the cables.
Check for problems with any enclosures attached to the system. Verify that the
controller has a supported version of the driver and firmware. Rebooting the
system may resolve this problem.
Category Storage
SubCategory STOR = Storage
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
2265
Server
Administrator
Trap ID
75300;80300;85300;90300;95300;100300;105300;110300;115300;120300
STOR5
Message Redundancy lost.arg1
Arguments
• arg1 = VD/Enclosure Name
Detailed
Description
A virtual disk or enclosure has lost data redundancy. In the case of a virtual disk,
one or more physical disks included in the virtual disk have failed. Due to the failed
physical disk or disks, the virtual disk is no longer maintaining redundant (mirrored
or parity) data. The failure of an additional physical disk will result in lost data. In the
case of an enclosure, more than one enclosure component has failed. For
example, the enclosure may have suffered the loss of all fans or all power supplies.
261