Reference Guide

Recommended
Response
Action
Reconnect the power cable to the power supply unit if it was disconnected.
Restore the input AC power supply. Make sure the power supply is restored to the
enclosure from the mains.
Category Storage
SubCategory PSU = Power Supply
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
2312;2313
Server
Administrator
Trap ID
100300
PSU1002
Message arg1was removed
Arguments
• arg1 = PSU Sensor Name
Detailed
Description
The enclosure detected that a power supply unit was removed and is no longer
functioning in optimal condition.
Recommended
Response
Action
Re-insert the power supply unit into the enclosure. Re-connect the AC power
cable and switch on the power supply unit. Contact technical support if the issue
persists.
Category Storage
SubCategory PSU = Power Supply
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
2324
Server
Administrator
Trap ID
100400
PSU1004
Message Power supply cable has been inserted intoarg1.
Arguments
• arg1 = PSU Sensor Name
234