Reference Guide

Server
Administrator
Trap ID
90300
PDR56
Message Bad block table onarg1is 80% full.
Arguments
• arg1 = physical disk
Detailed
Description
The bad block table is the table used for remapping bad disk blocks. This table fills
as bad disk blocks are remapped. When the table is full, bad disk blocks are no
longer remapped, which means that disk errors are no longer corrected. At this
point, data loss can occur. The bad block table is now 80 percent full.
Recommended
Response
Action
Replace the disk generating this message.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
2306
Server
Administrator
Trap ID
90300
PDR57
Message Bad block table onarg1is full. Unable to log blockarg2.
Arguments
• arg1 = physical disk
• arg2 = logical block address
Detailed
Description
The bad block table is the table used for remapping bad disk blocks. This table fills
as bad disk blocks are remapped. When the table is full, bad disk blocks are no
longer remapped, which means that disk errors are no longer corrected. At this
point, data loss can occur.
Recommended
Response
Action
Replace the disk generating this message and restore from a backup copy. You
may have lost data.
Category Storage
206