Reference Guide

2
AMP Event Messages
AMP400
Message Thearg1sensor has failed, and the last recorded value by the sensor wasarg2A.
Arguments
• arg1 = sensor name
• arg2 = current
Detailed
Description
The current sensor identified in the message has failed. This condition can cause
system performance issues and degradation in the moitoring capability of the
system.
Recommended
Response
Action
Check the Embedded System Management (ESM) Log for any sensor related faults.
If there is a failed sensor, replace the system board. For more information, contact
your service provider.
Category System Health
SubCategory AMP = Amperage
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
5200
Server
Administrator
Trap ID
AMP401
Message Unable to read thearg1sensor value.
Arguments
• arg1 = sensor name
Detailed
Description
The current sensor identified in the message has failed. This condition can cause
system performance issues and degradation in the moitoring capability of the
system.
Recommended
Response
Action
Check the Embedded System Management (ESM) Log for any sensor related faults.
If there is a failed sensor, replace the system board. For more information, contact
your service provider.
19