Reference Guide

Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
5303
Server
Administrator
Trap ID
FAN0022
Message Thearg1sensor has failed, and the last recorded value by the sensor wasarg2RPM.
Arguments
• arg1 = sensor name
• arg2 = fan speed
Detailed
Description
The sensor identified in the message has failed. The sensor may be required for
optimal system performance.
Recommended
Response
Action
Check the Embedded System Management (ESM) Log for any sensor related faults.
If the fan sensor has failed, replace the system board. For more information,
contact your service provider.
Category System Health
SubCategory FAN = Fan Event
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Server
Administrator
Event ID
5100
Server
Administrator
Trap ID
FAN0024
Message Thearg1sensor returned to a normal state with a value ofarg2RPM.
Arguments
• arg1 = sensor name
• arg2 = fan speed
Detailed
Description
The sensor identified in the message has returned to a normal state.
132