Reference Guide

Detailed
Description
The DUP specified is not compatible with the target system.
Recommended
Response Action
Download and use the DUP that matches the system that the installation is targeting.
Category Updates
SubCategory RED = FW Download
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RED018
Message Reinstall or Rollback not supported for this device.
Detailed
Description
Reinstall or Rollback not supported for this device.
Recommended
Response Action
1. Update the device directly using the update methods since rollback is not supported for this
device. 2. Verify that the target specified in the command is correct.
Category Updates
SubCategory RED = FW Download
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RED019
Message Reinstall or Rollback cannot be performed since no applicable firmware was found on the
Lifecycle Controller.
Detailed
Description
Reinstall or Rollback cannot be performed since no applicable firmware was found on the
Lifecycle Controller.
967