Reference Guide

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC1023
Message Unable to create the configuration job.
Detailed
Description
Configuration jobs are created only if at least one object on the device or component (for
example, NIC.Slot.1 or BIOS) has a pending value to be applied.
Recommended
Response Action
Make sure that there is at least one object on the specified device or component that has a
pending vlaue, and retry the operation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC1024
Message Successfully scheduled a job.
Detailed
Description
The pending value is applied during the next reboot of system.
Recommended
Response Action
Verify the job status using "racadm jobqueue view -i JID_xxxxx" command.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
936