Reference Guide

Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC1018
Message The specified object or syntax is invalid.
Detailed
Description
This occurs when an incorrect syntax is used or an incorrect object is specified during the
command invocation.
Recommended
Response Action
Make sure to use the correct syntax and correct object names, and retry the operation. For
information related to the corresponding group, see RACADM help or the RACADM Users
Guide.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC1019
Message The specified object is not supported for the current system configuration.
Detailed
Description
Some objects have dependencies on other objects that are required to perform a task. The
specified object is not available because of such dependencies.
Recommended
Response Action
Verify the object dependency using "racadm help <device class>.<groupname>.<objectname>",
and retry the operation. For example, racadm help NIC.VndrConfigGroup.1.VirtWWPN.
Category Configuration
SubCategory RAC = RAC Event
934