Reference Guide

Recommended
Response Action
To configure the SNMPv3 Privacy Protocol for a specified iDRAC user, change the SNMPv3
Authentication Protocol to either MD5 or SHA state using "racadm set
idrac.users.<index>.SNMPv3AuthenticationType <value>".
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC1016
Message The specified user already exists. Duplicate user names are not allowed.
Detailed
Description
iDRAC does not allow duplicate user names for each of the 16 users.
Recommended
Response Action
Make sure that each of the 16 user names are unique.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC1017
Message Successfully modified the object value and the change is in pending state.
Detailed
Description
Any staged operation requires a job and system reboot to apply the object values.
Recommended
Response Action
To apply modified value, create a configuration job and reboot the system. To create the
commit and reboot jobs, use "jobqueue" command. For more information about the "jobqueue"
command, see RACADM help.
933