Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC1004
Message The smart card login cannot be enabled.
Detailed
Description
The smart card login cannot be enabled, because the Active Directory Single Sign On is
enabled.
Recommended
Response Action
Disable Active Directory Single Sign On (SSO) using "racadm set
iDRAC.ActiveDirectory.SSOEnable <0 | Disabled>", and retry the operation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC1027
Message Successfully sent the alert for the specified event to the configured destination.
Detailed
Description
A test event was generated and the alert was successfully sent to the destination.
Recommended
Response Action
Verify if the alerts were received by the configured tdestination. Otherwise, reconfigure the
destination and retry the operation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
928