Reference Guide

Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC994
Message Unable to run the "jobqueue delete --all" command.
Detailed
Description
The jobs cannot be deleted if they are in one of these states: "Scheduled" or "Running".
However, all jobs in one of these states: "Completed" or "Failed" will be deleted.
Recommended
Response Action
To monitor the job status, use the "racadm jobqueue view -i <job ID>", and delete the jobs one
at a time using the "racadm jobqueue delete -i <job ID>" command.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC995
Message Unable to retrieve the hardware inventory.
Detailed
Description
The hardware inventory cannot be retrieved because of an internal error whether or not
Collect System Inventory On Restart (CSIOR) is enabled or disabled.
Recommended
Response Action
Make sure to enable Collect System Inventory On Restart (CSIOR) feature, reboot the system,
and retry the operation. If CSIOR is already enabled, reboot iDRAC using "racadm racreset"
command.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
921