Reference Guide

Detailed
Description
iDRAC is unable to read Lifecycle Controller status. Lifecycle Controller must be enabled to run
the operation.
Recommended
Response Action
Run the ?racadm get LifeCycleController.LCAttributes.LifecycleControllerState? command to
get the status of the Lifecycle Controller. If the issue persists, contact your service provider.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC964
Message Unable to perform the operation.
Detailed
Description
The operation cannot be performed because of an internal error.
Recommended
Response Action
Wait for some time before retrying the operation. If the issue persists, contact your service
provider.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC965
Message The -l option must be specified if -u and -p are used.
Detailed
Description
Any operation involving remote share (CIFS) cannot continue if the location (-l) is not specified.
The ?u and ?p options represent the user name and password for the remote share, and -l
represents the location of the remote share.
907