Reference Guide

Detailed
Description
The category or subcategory specified is incorrect. The recurrence interval is applicable only
to the TMPS subcategory and system category.
Recommended
Response Action
See the command help text, for a list of valid categories.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC930
Message Unable to export the inlet temperature data.
Detailed
Description
Racadm is currently unable to obtain the inlet temperature data. This happens if there is no
data populated in the temperature tables or if the instrumentation does not return valid values.
Recommended
Response Action
Wait for the instrumentation to populate the thermal tables. Retry the operation. If the problem
persists, contact the service provider.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC936
Message Unable to change the hot spare property for the PSU.
Detailed
Description
iDRAC cannot enable or disable the hot spare property, because the system has a non-PMBus
PSU.
Recommended
Response Action
No response action is required.
893