Reference Guide

Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC059
Message Unable to configure time because Network Time Protocol (NTP) is enabled.
Detailed
Description
When Network Time Protocol (NTP) feature is enabled, iDRAC will get time from NTP servers.
Directly configuration of the iDRAC time is disabled with NTP is enabled.
Recommended
Response Action
Disable Network Time Protocol (NTP) and retry the operation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0901
Message Invalid syntax. The -t option value must set to 1.
Detailed
Description
The syntax of the specified command is invalid. In this case, the usage of the -t option is
invalid.
Recommended
Response Action
See the help text/documentation for the valid syntax of the subcommand.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
880