Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC057
Message Unable to set Privacy Protocol to an enabled state because the Authentication Protocol
attribute is set to None for the user ID: arg1
Arguments
• arg1 = user ID
Detailed
Description
The Privacy Protocol for the user cannot be enabled because the Authentication protocol is
disabled.
Recommended
Response Action
Enable the Authentication Protocol attribute for the identified user ID account, and retry the
operation to set the Privacy Protocol to an enabled state.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC058
Message AttributeValue is not unique for AttributeName arg1 .
Arguments
• arg1 = attribute name
Detailed
Description
The value provided for the specified attribute is not unique. For example, the user name for a
user account must be unique.
Recommended
Response Action
Provide a unique value for the specified attribute. For more information about the component
being managed, see the DCIM Profile documentation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
879