Reference Guide

Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0101
Message The inserted Smart Card is not valid or the Smart Card reader is not supported.
Detailed
Description
The data returned is not in a known format.
Recommended
Response Action
This error may occur because: 1. Smart Card is invalid. Insert a valid Smart Card and try again.
2. Check connection between reader and system. 3. There may be an issue with the Smart Card
reader. Try reinstalling the reader driver or use a different reader.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0102
Message The Smart Card Logon plug-in is not installed. Install the plug-in from the iDRAC Web GUI to log
in using Smart Card.
Detailed
Description
The software to communicate with the Smart Card is not loaded in this browser. Smart Card
can be used for log in only if the appropriate Smart Card software is installed in the browser.
Recommended
Response Action
Install the plug-in prompted by the iDRAC Web GUI to log in using Smart Card.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
813