Reference Guide

Detailed
Description
The data entered caused an error while processing the request.
Recommended
Response Action
Make sure to enter the correct data and retry the operation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0619
Message The iDRAC firmware rollback will cause an iDRAC restart and all current user sessions will be
closed.
Detailed
Description
The message appears in Firmware Rollback page when the iDRAC firmware rollback action
completed successfully.
Recommended
Response Action
Reconnect iDRAC communications sessions after iDRAC is restarted. The iDRAC will be ready
for login once the restart is complete.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0620
Message Lifecycle Controller is unable to delete the selected jobs.
Detailed
Description
Lifecycle Controller is currently busy performing tasks. The selected jobs cannot be deleted
until the following: 1) The Lifecycle Controller tasks are completed. 2) The system completes all
the Power-on-Self-test (POST) operations.
810