Reference Guide

39
RAC Event Messages
RAC0500
Message There are no batteries to be displayed.
Detailed
Description
Batteries cannot be displayed. This error may occur if the host system is powered off or there
is a bad or disconnected cable for batteries connected to the controller.
Recommended
Response Action
1. Check if the host system is powered off or shutdown. 2. Verify that the batteries are
connected properly.
Category Storage
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0501
Message There are no physical disks to be displayed.
Detailed
Description
Physical disks cannot be displayed. This error may occur if the host system is powered off or
the physical disks are removed. This may result in communication loss while retrieving
controller data.
Recommended
Response Action
1. Check if the host system is powered off or shutdown. 2. Check if the physical disks are
inserted into the enclosure or attached to the backplane. 3. There are no out-of-band capable
controllers detected.
Category Storage
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
795