Reference Guide

Severity Severity 1 (Critical)
Trap/EventID 4233
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
PSU1002
Message arg1 was removed
Arguments
• arg1 = PSU Sensor Name
Detailed
Description
The enclosure detected that a power supply unit was removed and is no longer functioning in
optimal condition.
Recommended
Response Action
Re-insert the power supply unit into the enclosure. Re-connect the AC power cable and switch
on the power supply unit. Contact technical support if the issue persists.
Category Storage
SubCategory PSU = Power Supply
Severity Severity 1 (Critical)
Trap/EventID 4233
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
PSU1003
Message arg1 is switched OFF.
Arguments
• arg1 = PSU Sensor Name
Detailed
Description
The power supply is not providing any power. This may be because the power supply switch is
in the off position or the power supply has failed.
Recommended
Response Action
Check whether the power switch on the power supply unit is turned off or on. If it is turned off,
turn it on. If the problem is not corrected, verify that the power cord is attached and functional.
See the storage hardware documentation for more information.
730