Reference Guide

SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR17
Message Some of the configuration values stored for the previous device could not be applied to
device: arg1
Arguments
• arg1 = device name
Detailed
Description
Some of the configuration values stored for the previous device could not be applied to the
current device. This may be due to firmware version or other differences in the part.
Recommended
Response Action
Check the devices configuration and ensure that the new configuration is correct for the
system.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR18
Message Firmware version difference detected for device: arg1
Arguments
• arg1 = device name
Detailed
Description
The Part Replacement feature has detected a firmware difference between the current and
previous components. Depending on the Part Firmware Update setting value this may cause a
firmware update to the replaced part.
709