Reference Guide

Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR13
Message Firmware mismatch detected. Configuration changes not applied.
Detailed
Description
The Part Replacement feature deteced a firmware difference and cannot apply the
configuration changes. After the device firmware is updated, configuration changes can be
applied.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR14
Message The configuration could not be applied to device: arg1
Arguments
• arg1 = device name
Detailed
Description
The device could not apply the configuration settings. This may indicate configuration changes
since the last system inventory.
Recommended
Response Action
Check the current system configuration and retry the operation.
Category Configuration
SubCategory PR = Part Exchange
707