Reference Guide

Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR5
Message The configuration values stored for the previous device could not be applied to device: arg1
Arguments
• arg1 = device name
Detailed
Description
Some or all configuration values stored for the previous device could not be applied to the
current device. This may be due to firmware version or other differences in the part.
Recommended
Response Action
Check the devices configuration and ensure that the new configuration is correct for the
system.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR6
Message Configuration changes successfully applied to device: arg1
Arguments
• arg1 = device name
Detailed
Description
The configuration values stored for the previous device were applied to the current device.
Recommended
Response Action
No response action is required.
Category Configuration
703