Reference Guide

SubCategory PDR = Physical Disk
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PDR95
Message Microcode update on arg1 has failed.
Arguments
• arg1 = physical disk
Detailed
Description
The attempt to update the physical disk has failed. This is due to too much activity on the bus, a
bad update package, or a bad disk.
Recommended
Response Action
Retry the update. If the update fails a second time, verify the update package is valid. If the
update package is valid, replace the failing disk. Contact technical support if the problem
persists.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID 4346
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
PDR96
Message Security was disabled on arg1 .
Arguments
• arg1 = physical disk
Detailed
Description
Security on a secure encrypted disk was disabled.
671