Reference Guide

Detailed
Description
The reason for the error can vary depending on the situation. The firmware error code is
indicated in the message.
Recommended
Response Action
Verify the health of attached devices. Review the Lifecycle log for significant events. Replace
faulty hardware, if required. Make sure the cables are attached securely. Refer to the storage
hardware documentation for more information on checking the cable connections.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID 4346
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
PDR61
Message The rebuild of arg1 failed due to errors on the source physical disk.
Arguments
• arg1 = physical disk
Detailed
Description
It is not possible to rebuild data that resides on a defective disk.
Recommended
Response Action
Replace the source disk and restore data from backup.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 1 (Critical)
Trap/EventID 4345
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
PDR62
Message The rebuild failed due to errors on the target arg1 .
654