Reference Guide

LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PDR43
Message The clear operation on arg1 has completed.
Arguments
• arg1 = physical disk
Detailed
Description
This message is generated after a clear operation completes on a physical disk.
Recommended
Response Action
No response action is required.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PDR44
Message The clear operation on arg1 failed.
Arguments
• arg1 = physical disk
Detailed
Description
A Clear task was being performed on a physical disk but the task was interrupted and did not
complete successfully. The controller may have lost communication with the disk, the disk was
removed, or the cables may be loose or defective.
Recommended
Response Action
Verify that the disk is present and not in a Failed state. Make sure the cables are attached
securely. See the storage hardware documentation for more information on checking the
cables. Restart the Clear task.
Category Storage
SubCategory PDR = Physical Disk
644