Reference Guide

OSD31
Message Copying operating system drivers to network share failed
Detailed
Description
Copying drivers for the selected operating system to network share failed. The share may be
read-only or the Driver Pack present in Lifecycle Controller may be unusable.
Recommended
Response Action
1) Make sure that the network share has write permission. 2) Update the Driver Pack using
USC or DUP and then rerun the command.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD32
Message Unable to detach ISO image from the system.
Detailed
Description
Cannot continue with DetachISOImage because the system does not have an attached ISO
image.
Recommended
Response Action
The call to DetachISOImage is unnecessary since the ISO image is not currently attached.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD33
Message Installed BIOS version does not support this method.
573