Reference Guide

Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD10
Message Installation not supported for the selected operating system.
Detailed
Description
Installation for the selected operating system is not supported. Make sure that the correct
operating system name was entered.
Recommended
Response Action
Recheck the operating system name with the output of GetDriverPackInfo().
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
OSD11
Message Driver Pack does not have drivers for the selected operating system.
Detailed
Description
Lifecycle Controller does not have any drivers for the selected operating system. The operating
system installation uses the native drivers present on the operating system media.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory OSD = OS Deployment
Severity Severity 3 (Informational)
563