Manualshelf

Reference Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Software 7.3
541542543544545546547548549550
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
NIC015
Message AttributeValue cannot be changed to read only AttributeName
arg1
.
Arguments
•
arg1 =
attribute name
Detailed
Description
A set attribute operation was attempted on a read only attribute.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory NIC = NIC Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
NIC016
Message AttributeValue cannot be changed for disabled AttributeName
arg1
.
Arguments
•
arg1 =
attribute name
Detailed
Description
A set attribute operation was attempted on a disabled attribute.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory NIC = NIC Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
549