Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
NIC005
Message Mismatch in AttributeName and AttributeValue count
Detailed
Description
The number of AttributeName and AttributeValue parameters do not match.
Recommended
Response Action
Pass the same number of parameters for AttributeName and AttributeValue. Refer to
documentation for method input parameter details.
Category Configuration
SubCategory NIC = NIC Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
NIC006
Message Configuration job already created, cannot set attribute on specified target until existing job is
completed or is cancelled
Detailed
Description
Configuration job already created on the specified target. No further command is allowed until
the existing job succeeded or the job is cancelled
Recommended
Response Action
Wait for the job to complete; to continue with a configuration change, cancel the job and
proceed.
Category Configuration
SubCategory NIC = NIC Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
544