Manualshelf

Reference Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Software 7.3
541542543544545546547548549550
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
NIC003
Message Missing required parameter
Detailed
Description
An invalid number of arguments was passed to the method.
Recommended
Response Action
Enter all the required command parameters. Check documentation and try again.
Category Configuration
SubCategory NIC = NIC Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
NIC004
Message Invalid parameter value for
arg1
Arguments
•
arg1 =
attribute name
Detailed
Description
The value for the specified parameter is invalid.
Recommended
Response Action
Verify that parameter values passed to the method are entered as they appear in the
enumeration and parameter data type matches the documentation.
Category Configuration
SubCategory NIC = NIC Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
543