Reference Guide

28
NIC Event Messages
NIC100
Message The NIC arg1 Port arg2 network link is down.
Arguments
• arg1 = Controller
• arg2 = Port
Detailed
Description
The network link is down. Either the network cable is not connected or the network device is
not working.
Recommended
Response Action
Verify that the network port is enabled and if the port has Activity/Speed LEDs, that they are lit.
Check the network cable, network cable connections, and the attached network switch.
Category System Health
SubCategory NIC = NIC Config
Severity Severity 2 (Warning)
Trap/EventID 2090
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
NIC101
Message The NIC arg1 Port arg2 network link is up.
Arguments
• arg1 = Controller
• arg2 = Port
Detailed
Description
The transition from network link down to network link up has been detected.
Recommended
Response Action
No response action is required.
Category System Health
SubCategory NIC = NIC Config
541