Reference Guide

Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
MEM6000
Message Memory device monitoring is disabled.
Detailed
Description
The memory module may not be correctly seated, wrongly configured, or has failed.
Recommended
Response Action
Review the Embedded System Management (ESM) Log for memory exceptions. Re-install the
memory modules.
Category System Health
SubCategory MEM = Memory
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
MEM6001
Message Memory device status is unknown. Memory device location: arg1 , Possible memory module
event cause: arg2 .
Arguments
• arg1 = location
• arg2 = cause
Detailed
Description
The memory module may not be correctly seated, wrongly configured, or has failed.
Recommended
Response Action
Review the Embedded System Management (ESM) Log for memory exceptions. Re-install the
memory modules at the identified location .
Category System Health
SubCategory MEM = Memory
Severity Severity 3 (Informational)
Trap/EventID FALSE
536