Reference Guide

LNK0005
Message Unable to connect to DHCP server.
Detailed
Description
Error occurred while communicating with the DHCP server because the network settings are
not configured correctly or the DHCP server could not be contacted.
Recommended
Response Action
Verify if the network cable is connected and network configuration settings are correct, and
retry the operation. If the problem persists, update the network interface controller (NIC)
firmware to the latest version and retry the operation.
Category System Health
SubCategory LNK = Link Status
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
498