Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC005
Message Invalid firmware update mode.
Detailed
Description
The value provided for the update mode parameter is invalid.
Recommended
Response Action
Verify that the correct firmware update mode was entered. The choices are: 1) Disable
(default) "0" 2)Allow version upgrade only "1" 3) Match firmware of replaced part "2"
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC006
Message Invalid Auto-Discovery action.
Detailed
Description
The Auto-Discovery action selected is invalid.
Recommended
Response Action
Verify that the selected Auto-Discovery action is supported. The supported commands are
documented in the Lifecycle Controller User Guide.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
443