Reference Guide

Detailed
Description
The USB drive is write protected.
Recommended
Response Action
Remove write protection on the USB drive before retrying the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0013
Message Unable to copy the file to USB drive.
Detailed
Description
The USB drive is disconnected or is not readable.
Recommended
Response Action
Remove and reinsert the USB drive and retry the operation. If the problem persists, restart the
system and retry.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0014
Message Unable to detect vFlash SD card.
Detailed
Description
The import operation failed because the vFlash SD card is missing or disabled.
Recommended
Response Action
Make sure the vFlash SD card is inserted and enabled before retrying the operation.
426