Reference Guide

HWC0008
Message Unable to communicate with iDRAC.
Detailed
Description
An internal error occurred while communicating with iDRAC.
Recommended
Response Action
Exit the wizard and retry the operation. If the problem persists: 1) Turn off the system and
disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the
system, and retry the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0009
Message Unable to enable vFlash SD card.
Detailed
Description
The vFlash SD card is missing or not inserted correctly. iDRAC is not able to enable vFlash SD
card.
Recommended
Response Action
Reinsert the vFlash SD card and retry the operation. If the problem persists: 1) Turn off the
system and disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord,
turn on the system, and retry the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
424