Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0006
Message Unable to save vFlash SD card settings.
Detailed
Description
If a vFlash SD card is not present in the system or if the card is locked, Lifecycle Controller
cannot save the settings.
Recommended
Response Action
Insert the vFlash SD card or unlock the vFlash SD card and retry the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0007
Message Unable to load vFlash SD card settings.
Detailed
Description
Lifecycle Controller is unable to retrieve vFlash SD card information from iDRAC.
Recommended
Response Action
Reinsert the vFlash SD card and retry the operation. If the problem persists: 1) Turn off the
system and disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord,
turn on the system, and retry the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
423