Reference Guide

LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC8009
Message SD card device sensor value unknown. SD card location: arg1 , SD card device type: arg2 , SD
card state: arg3 .
Arguments
• arg1 = location
• arg2 = type
• arg3 = state
Detailed
Description
An SD card device sensor in the identified system could not obtain a reading.
Recommended
Response Action
Remove and reinsert the identified SD card.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC0001
Message Unable to complete the operation as there is no response from iDRAC.
Detailed
Description
The error is caused due to iDRAC failure.
Recommended
Response Action
1) Turn off the system and disconnect the power cord. 2) Wait for five seconds. 3) Reconnect
the power cord and turn on the system.
Category Configuration
420