Reference Guide

Arguments
• arg1 = device location
• arg2 = details
Detailed
Description
A device was was removed from the system at the location identified in the message. Along
with the device location, additional event details are provided if available.
Recommended
Response Action
No response action is required.
Category Audit
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC8003
Message A configuration error was detected in the device located here: arg1 . Additional Details: arg2 .
Arguments
• arg1 = device location
• arg2 = details
Detailed
Description
A configuration error was detected for a pluggable device installed at the location identified in
the message. The device may not be installed correctly.
Recommended
Response Action
Reinsert the device or try inserting a different device of the same type and retry the operation.
If the issue persists, check the system documentation to make sure the device is supported or
contact your service provider.
Category Audit
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
416